影响柴油机喷雾数值模拟精度的若干因素分析

为探明影响柴油机喷雾数值模拟精度的若干因素,采用通用商业软件FLUENT对柴油机喷雾特性进行了CFD模拟计算,分别研究了网格尺寸、喷雾粒子数和最大时间步长对油束几何形状及油束贯穿距的影响.结果表明,网格划分的精度和喷雾粒子数量的多少对计算结果的正确性和油束的几何形状有直接的影响,网格尺寸过大或喷雾粒子数过少则喷雾几何形状失真.最大时间步长对数值模拟的精度在一定的范围内影响是比较小的.     

虚拟样机技术在特种斜盘发动机中的应用研究

利用ADAMS软件中的参数化分析工具,采用设计变量和局部模型重建的方法,实现了特种斜盘发动机斜盘倾角、后球心分布圆半径和导槽形式的参数化,建立了特种斜盘发动机参数化虚拟样机,并进而从设计研究、试验研究和初步优化分析等三个方面,对特种斜盘发动机进行了较为详细和全面的参数化分析.     

具有热阻、热漏和内不可逆性的联合卡诺热机生态学优化

用有限时间热力学的方法分析具有热阻、热漏、内不可逆性的定常流联合卡诺型热机循环.导出了在傅立叶导热定律下联合循环功率、效率和生态学指标的性能,并进行优化;得到功率、效率和生态学指标之间的优化关系,并由数值计算分析了功率、效率和循环熵产率之间的关系.所得的结果表明,最大生态学指标下的效率十分接近于联合循环可以达到的最大效率;相应的熵产率也要低于以输出功率为优化目标时的熵产率.     

对转涡轮用于水下航行器的初步研究

阐述了对转涡轮在航空航天领域的发展现状,总结出对转涡轮的优点和应用前景,提出了一种可用作水下航行器动力主机的涡轮机类型.分析了水下航行器涡轮机与航空航天涡轮机的差别,论证了对转涡轮使用在水下航行器上的可行性,建立了水下航行器对转涡轮机的设计框架.     

基于面向对象技术的柴油机在线状态监测系统设计

将软件设计中的面向对象思想扩展到系统设计中,针对柴油机实车运行在线监测中的变速变载及空间有限等问题,基于CAN总线的可靠性、信息传输的实时性和多主工作方式,设计分布式智能监测节点和上位机监控中心．分布式监测节点同步采集柴油机运行数据并进行降噪和简单特征提取后,将实时采样数据和在线监测结果上传至基于嵌入式PCI04的上位机监控中心,进行二次特征提取和智能模式识别,从而实现柴油机在线状态监测与故障预警和诊断．     

Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

Deconsolidation and combustion performance of thermally consolidated propellants deterred by multi-layers coating

Both heating and solvent-spray methods are used to consolidate the standard grains of double-base oblate sphere propellants plasticized with triethyleneglycol dinitrate (TEGDN) (TEGDN propellants) to high density propellants. The obtained consolidated propellants are deterred and coated with the slow burning multi-layer coating. The maximum compaction density of deterred and coated consolidated propellants can reach up to 1.39 g/cm³. Their mechanic, deconsolidation and combustion performances are tested by the materials test machine, interrupted burning set-up and closed vessel, respectively. The static compression strength of consolidated propellants deterred by multi-layer coating increases significantly to 18 MPa, indicating that they can be applied in most circumstances of charge service. And the samples are easy to deconsolidate in the interrupted burning test. Furthermore, the closed bomb burning curves of the samples indicate a two-stage combustion phenomenon under the condition of certain thickness of coated multi-layers. After the outer deterred multi-layer coating of consolidated samples is finished burning, the inner consolidated propellants continue to burn and breakup into aggregates and grains. The high burning progressivity can be carefully obtained by the smart control of deconsolidation process and duration of consolidated propellants. The preliminary results of consolidated propellants show that a rapid deconsolidation process at higher deconsolidation pressure is presented in the dynamic vivacity curves of closed bomb test. Higher density and higher macro progressivity of consolidated propellants can be obtained by the techniques in this paper.     

N2O/C7H8单喷嘴燃气发生器试验研究

以基于N2O/C7H8的燃烧驱动混合型气动CO2激光器点火试验为研究背景,设计了液态N2O供应系统及N2O/C7H8单喷嘴燃气发生器.对液态N2O供应系统、N2O/C7H8的点火及燃烧性能进行了研究.试验结果表明:设计的N2O供应系统能够实现液态N2O的稳定供应;在设定的时序下,两个设计工况(余氧系数分别为0.3和0....     

低温推进剂供应管道系统充填过程的动力学模型

研究了低温推进剂液体火箭发动机供应管道系统充填过程的建模问题。低温推进剂的充填相变过程采用均相模型,对推进剂充填管道系统进行有限元分割,应用基本守恒定律于充满推进剂的单元和充满气体的单元,两相单元采用等效流容方程,建立了低温推进剂管道充填过程的有限元状态变量模型。充填的容腔视为两相单元,建立了其动力学模型。利用本文的模型,对液氢、液氧推进剂的管道充填过程进行了仿真计算,给出了有关计算结果。     

某型枪弹火药性能对内弹道性能影响试验研究

通过对某型枪弹 (如经过技术处理的正常弹、减量弹、加温弹、干燥弹及受潮弹 )初速和最大膛压的测定 ,得出火药的药量、初温及挥发份对内弹道性能 (如膛压、初速 )有较大影响 ,因此 ,必须严格控制弹药的储存条件及装药量。